• New Products

FRITSCH GmbH

Efficient pre- and fine grinding in one instrument with impact or cutting rotor



P-14 premium-line
Variable Speed Rotor Mill
PULVERISETTE 14 premium line
The FRITSCH Variable Speed Rotor Mill PULVERISETTE 14 premium line offers impact, shearing and cutting comminution in one instrument - with a higher performance, better cooling and significantly quieter than comparable instruments. Its powerful motor is ideal for the particularly fast comminution of soft to medium-hard, brittle as well as fibrous materials and temperature-sensitive samples with an extremely fast sample throughput of up to 15 litres and more per hour, depending on the material and parameter settings.

Overview of the premium features:

  • Powerful grinding with 22,000 rpm for particularly fast sample throughput
  • Extremely high impact speed of the rotor (111 m/s = 399.6 km/h)
  • Max. feed size < 15 mm, sample throughput of up to 15 l/h and more
  • P-14 Cutting-Insert
    Cutting with the
    Variable Speed Rotor
    Multifunctional with impact or cutting rotor in one instrument
  • AutoLOCK grinding chamber for particularly safe work
  • Final fineness down to d50 < 40 μm, sieve rings 0.08 - 6 mm
  • Particularly good cooling of the grinding material
  • Pleasantly quiet operation
  • Very easy to clean due to Clean Design

Available only from FRITSCH: Cutting with a Centrifugal Mill

With the cutting rotor the Variable Speed Rotor Mill PULVERISETTE 14 premium line is ideal for fast, efficient pre-grinding of fibrous materials and plastics. The material is comminuted increasingly finer between the straight cutting edges of the cutting rotor and the fixed knives of the sieve shells holder until the desired final fineness is achieved. The rotor operates with up to 10,000 rpm. The use of a FRITSCH Cyclone separator will further improve throughput and cooling.

FRITSCH premium advantage: Incredibly safe operation

The new AutoLOCK grinding chamber facilitates automatic opening and closing with clamping and crushing protection. The additional Intelligence-Safety-Control-System only allows the instrument to start if the grinding set is fully and correctly inserted.

P-14 Clean-Design
Well-conceived Clean Design
for especially easy cleaning
FRITSCH premium advantage: Fast, residue-free cleaning

The well-conceived Clean Design covers all the areas, which make the cleaning of your mill as easy as possible: All the surfaces are designed to be extremely dirt-resistant and easy to clean. And all the parts that need regular cleaning can be removed with a single motion without tools. Even the lid of the instrument can be easily removed for cleaning.

Test the FRITSCH Variable Speed Rotor Mill PULVERISETTE 14 premium line

Send us your most difficult sample - we will carry out an individual sample grinding for you. Compare for yourself!

» further information

» Video about the Variable Speed Rotor Mill PULVERISETTE 14 premium line

» Up-dated information on the FRITSCH Rotor Mills


FRITSCH GmbH
Milling and Sizing
Industriestrasse 8
D-55743 Idar-Oberstein

Fon : +49 (0)6784 / 70 150
Fax : +49 (0)6784 / 70 11
Mail: Contact Kontakt
Web: www.fritsch.de




Subscribe:

Recommend: